Blog Archives

How to Calibrate a Printer (version 6.0+)

Posted on June 15, 2015 by jason

The following is a step-by-step guide to the methods used to achieve ISO calibrated output using Serendipity Blackmagic / Megarip version 6.0+. The setup described below is for an Epson 7900 being calibrated to a Fogra 39 standard. Linearisation Curves will be generated using … Continue reading →

,
, , , , ,
Posted in Blackmagic, HowTo, Megarip, Printing | Tagged | Comments Off on How to Calibrate a Printer (version 6.0+)

Eizo ColorEdge CG277/CG247 Calibration Settings

Posted on July 9, 2014 by jason

When calibrating Eizo CG277 and CG247 monitors for Softproofing in Veripress and Blackmagic, Serendipity recommend the following Displays application settings:- Brightness: 180 cd/m2 Whitepoint: D65 (6500K) Gamma: 2.2 Options: Use Hardware Calibration Instrument: Eizo CG277 (or CG247) These settings are … Continue reading →

,
Posted in Blackmagic, HowTo, Veripress | Tagged | Comments Off on Eizo ColorEdge CG277/CG247 Calibration Settings

Running the Serendipity Agent as an Admin Service

Posted on July 4, 2014 by jason

Serendipity Blackmagic / Veripress users in certain Windows operating system environments may find the Serendipity Polling Agent service will not start at login or after installation. A common reason for this is the Windows user account login not having access … Continue reading →

,
, ,
Posted in Blackmagic, HowTo, Veripress | Comments Off on Running the Serendipity Agent as an Admin Service

Configuring N-Colour Media and Paper Profiles for printers with custom ink sets

Posted on April 3, 2014 by jason

Serendipity Blackmagic and Megarip 5.4.02 added a new NColour Ink Configuration function allowing users to profile printers loaded with non-standard replacement ink sets. The interface can define a customised printer ink set including ink colours, light inks and device spot … Continue reading →

,
, , , ,
Posted in Blackmagic, HowTo, Megarip, Printing | Comments Off on Configuring N-Colour Media and Paper Profiles for printers with custom ink sets

Using Advanced Black & White Photo Mode for Epson HTM Media

Posted on March 14, 2014 by jason

Serendipity Blackmagic and Megarip support the Advanced Black & White Photo Mode available to particular Epson printer models using HTM or EPD (Epson Precision Dot) drivers. Advanced Black & White mode can be used to produced both neutral and toned … Continue reading →

,
, ,
Posted in Blackmagic, HowTo, Megarip, Printing | Comments Off on Using Advanced Black & White Photo Mode for Epson HTM Media